ODROID-C2
The ODROID-C2 is a 64-bit quad-core single board computer(SBC) that is one of the most cost-effective 64bit development boards available in the ARM world. It can function as a home theater set-top box, a general purpose computer for web browsing, gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering, a controller for home automation, a workstation for software development, and much more. Some of the modern operating systems that run on the ODROID-C2 are Ubuntu, Android, ARCHLinux, Debian, with thousands of free open-source software packages available. The ODROID-C2 is an ARM device — the most advanced architecture for mobile devices and embedded 64-bit computing. The ARM processor’s small size, reduced complexity and low power consumption makes it very suitable for miniaturized devices such as wearables and embedded controllers.
Specification
- Amlogic ARM® Cortex®-A53(ARMv8) 1.5Ghz quad core CPUs
- Mali™-450 GPU (3 Pixel-processors + 2 Vertex shader processors)
- 2Gbyte DDR3 SDRAM
- Gigabit Ethernet
- HDMI 2.0 4K/60Hz display
- H.265 4K/60FPS and H.264 4K/30FPS capable VPU
- 40pin GPIOs + 7pin I2S
- eMMC5.0 HS400 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
- USB 2.0 Host x 4, USB OTG x 1 (power + data capable)
- Infrared(IR) Receiver
- Ubuntu 16.04 or Android 5.1 Lollipop based on Kernel 3.14LTS
PinOut
| **Pin ** | Expansion Net Name | Description | Driving Capability |
|---|---|---|---|
| 1 | 3.3V Power | ||
| 2 | 5.0V Power | ||
| 3 | I2CA_SDA | Export GPIO#205 | |
| 4 | 5.0V Power | ||
| 5 | I2CA_SCL | Export GPIO#206 | |
| 6 | Ground | ||
| 7 | GPIOX.BIT21 | Export GPIO#249, Wiring Pi GPIO#7 | 3mA |
| 8 | TXD1 | /dev/ttyS1, Export GPIO#240 | |
| 9 | Ground | ||
| 10 | RXD1 | /dev/ttyS1, Export GPIO#241 | |
| 11 | GPIOX.BIT19 | Export GPIO#247, Wiring Pi GPIO#0 | 3mA |
| 12 | GPIOX.BIT10 | Export GPIO#238, Wiring Pi GPIO#1 | 3mA |
| 13 | GPIOX.BIT11 | Export GPIO#239, Wiring Pi GPIO#2 | 3mA |
| 14 | Ground | ||
| 15 | GPIOX.BIT9 | Export GPIO#237, Wiring PI GPIO#3 | 3mA |
| 16 | GPIOX.BIT8 | Export GPIO#236, Wiring Pi GPIO#4 | 3mA |
| 17 | 3.3V Power | ||
| 18 | GPIOX.BIT5 | Export GPIO#233, Wiring Pi GPIO#5 | 4mA |
| 19 | GPIOX.BIT7 | Export GPIO#235, Wiring Pi GPIO#12, PWM1 | 3mA |
| 20 | Ground | ||
| 21 | GPIOX.BIT4 | Export GPIO#232, Wiring Pi GPIO#13 | 4mA |
| 22 | GPIOX.BIT3 | Export GPIO#231, Wiring Pi GPIO#6 | 4mA |
| 23 | GPIOX.BIT2 | Export GPIO#230, Wiring Pi GPIO#14 | 4mA |
| 24 | GPIOX.BIT1 | Export GPIO#229, Wiring Pi GPIO#10 | 4mA |
| 25 | Ground | ||
| 26 | GPIOY.BIT14 | Export GPIO#225, Wiring Pi GPIO#11 | 3mA |
| 27 | I2CB_SDA | Export GPIO#207 | |
| 28 | I2CB_SCL | Export GPIO#208 | |
| 29 | GPIOX.BIT0 | Export GPIO#228, Wiring Pi GPIO#21 | 4mA |
| 30 | Ground | ||
| 31 | GPIOY.BIT8 | Export GPIO#219, Wiring Pi GPIO#22 | 3mA |
| 32 | GPIOY.BIT13 | Export GPIO#224, Wiring Pi#26 | 3mA |
| 33 | GPIOX.BIT6 | Export GPIO#234, Wiring Pi GPIO#23, PWM0 | 3mA |
| 34 | Ground | ||
| 35 | GPIOY.BIT3 | Export GPIO#214, Wiring Pi GPIO#24 | 3mA |
| 36 | GPIOY.BIT7 | Export GPIO#218, Wiring Pi GPIO#27 | 3mA |
| 37 | ADC.AIN1 | 10bit ADC#1 (0~1.8Volt) | |
| 38 | 1.8V Power | For ADC reference voltage. Output! | |
| 39 | Ground | ||
| 40 | ADC.AIN0 | 10bit ADC#0 (0~1.8Volt) |