Content for Project

Automatic dispenser for cats

“It automatically supplies meals to your pet at preset times, by providing the daily dose of cat kibble. Having a pet involves big responsibilities, first of all granting them food; unfortunately, a hectic lifestyle and imposed workhours do not go …

Automatic Lights Connected With Door and Door Monitoring.

“It seems to be very difficult to find the switch board in the dark but this project is really helpful to solve this problem. Follow the steps below to know the solution of this….. n this project you will need …

Brew|LOGIC - Bluetooth Enabled Arduino Brewing Controller

“Brewing beer has become a worldwide phenomenon. Beer and wine is being crafted in ordinary kitchens in every corner of the world. One phrase that you may hear from your fellow homebrewer is “From Grain to Glass”, which refers to …

Caliper Data Interface

“Using Eagle, the PCB I designed is a caliper data interface. This board works with several models of inexpensive Chinese calipers and tire depth gauges. The board allows for either a TTL serial and/or an I2C interface. Through either …

Data Center Monitoring by IOT ESP32

“Are you familiar with SNMP (Simple Network Management Protocol)? Its used to control services and equipment on the Internet, as well as for device management in IP networks. I decided to use it in a project similar to one that …

DigiLogiProbe V1

“This project has been edited. The original Instructy had far too many words. WHY I have searched around the web, and I could not locate a mash up like this. DigiSpark was a crowdfund project to leverage the ATTiny85 chip …

Digital Tilt Sensor Using LM358

“Sensors are the best thing to get started with DIY electronics, you can get a wide variety of sensors, each suitable for one or more tasks. The Arduino is compatible with a variety of sensors and I’m going to …

DIY Dancing Waterfall

“Hello! Friends, today in this instructable RusticKraft presents a beautiful DIY Dancing Water Fountain made with PVC pipe. Its a very simple project to make at home. Materials Needed: - PVC Pipe 1/2 inch - PVC endcap 1/2 inch 2_ …

DIY - Remote Control Snake

“This Instructable is about a wireless DIY Remote Control Snake that i made at home using cardboard. The remote control toy is loved by people of all age groups and there is no better fun than making one on your …

Dynamic Desk Lamp

“Hi Guys I have made this Dynamic light Desk lamp that will keep the environment around you live and soothing and happening. You can choose the color of light with remote controller and change it according to your mood, and …