Other
“Dont lie when we say that all of us at some point in time feel way too tired or lazy to get up and go from room to another just to open the door. Yall have been there. For sure …
“Donkey Car featuring the Ultra96 board, a Raspberry Pi, FPGA accelerated stereo vision, MIPI CSI-2 image acquisition, a LiDAR sensor and AI. In this project, I will document the build of a Donkey Car enhanced with an advanced vision …
“Hello friends! This is another simple project for everyone who always want to program and upload code to their ATmega and Arduino projects. That’s why I decided to make my ownUSBasp. This is a really simple and low-cost project …
“There are so called “USB Fairy Lights” or “USB String Lights” can be purchased from china for less than 3$ for a 10m/100Led set. These are 5V USB powered and weather-proof(except the USB connector part). I was curious …
“Do you get nightmares of losing your YouTube Subscribers? If you do, you are not the only one. Luckily I have made this “YouTube Desktop Notifier” to keep me up-to-date with my channels Subscriber and View Counts. This very simple …
“TLDR; I built a openwrt based custom firmware(autom8box), that packs router_functionality+domoticz_server+mqtt_broker which is all-in-one home-automation-gateway-solution running on a cheap $20 router that can be purchased off-the-shelf. Wifi based home automation products are cheaper compared to zigbee or …
“Generally, an ultrasound sensor is used for the range of the target. where it sends the sound wave to target and reflected wave is captured by integrated receiver it measures an overall time of travel for the sound wave. As …
“Hello, and welcome to this project, actually it includes two projects but theyre pretty much the same, its a door lock system based on an Arduino UNO board, FPM10A optical fingerprint sensor and a LCD ic screen, but for the …
“HI! This is my first instructable, ill do my very best to make it a good one. Im not a native speaker, so please keep any mistakes you might find. This instructable will show you how to build your own …
“This is my first Instructable. This project uses Arduino and a 2.8” TFT touchscreen with a password sketch to activate a relay that breaks the circuit to a mag lock door. Background, the RFID lock on a door at …