Other
“I was learning OpenSCAD and wanted to make an enclosure for an electronics project. Rather than create a box each time I thought it would make more sense to have a “library” file which could create the box I needed …
“This is a cyclone vacuum cleaner. It’s work with a 2.5A, 12V computer fan. For best aspiration you can change fan. I made this for work with my Proxxon TG125 disk sander. For best safety, you can add …
“The chassis is now a lot less bulky and consists of multiple parts, the pulleys move more easily now. Before printing everything it is best to print a couple chain links to see if they work. When using multiple links …
“Self Watering Jar Planter. The tube on the side is there to be able to refill the jar without removing the plant. Inspired by Light24bulbs. http://www.thingiverse.com/thing:1796808 Printed with PETG”
“stylesuxx used his Customizable Storage Box with Drawers to create this great Resistor Storage (Resistor Sorter) thing. I wanted to screw a stack of resistor boxes to my shop’s wall so I created a very, very simple wall mount …
“Sometimes it is difficult to fix the components when we are soldering. So I decided to create this project. The softwere used for 3D skeches was Autodesk Inventor. To create the g.code i used the Cura softwere. The printer …
“Adapter from a standard CR2032 to the CR2430. Added the SCAD model and made some adjustments so I can use it in the remote control.”
“This nutcracker is thought to avoid the pulping of nuts which usually occurs with common nutcrackers. It actually already exists made in wood.”
“I was asked by my brother to make a pot to fit into a bulbasaur planter I had printed to give to him. I couldn’t find a simple plant pot with holes in it anywhere on thingiverse so I …
“Customizable plant pot with flat bottom and water in/outlets to the side and at the bottom. I use this on an irrigation mat where the plants are watered from below - but may be used just conventionally.”