Other
“Simple Neopixel Ring Clock”
“Almost all the OLED look like the same. I always want to make it look more compact. So I made this tiny 1.3 OLED. I call it “X-OLED”. Then I develop a project called “X-project”. All the shields …
“In this project we ‘ll show you how to make a watch using an Adafruit Feather M0, an RTC module and an OLED display. This uses microPython, which is an interpreted language that runs on small embedded boards. Be sure …
“I am a “lover” of watches and, when I saw “The Fibonacci Clock”, I wanted to make one. The “FiBiNo Clock” (Fibonacci Binary ArduiNo Clock) is a clock that displays the hours with Fibonacci method, while the minutes and the …
“Does the world need more Arduino clocks? Maybe not. But I needed another Arduino project as I had made a K3NG morse keyer. I love this keyer because it is unique in supporting a display where you can see what …
“This a week-end project. Six 8x8 led matrix, Arduino nano and Real Time Clock. It just gives time. No fancy alarm or display mode even though I wanted to do so in the begining. The RTC clock is very precise …
“eDOT is an Arduino based precision clock and weather station with built in IR remote receiver and automatic brightness adjustment. The device has been designed to be easily expanded with additional hardware like WIFI module or other. Thanks to its …
“For a time I tried to build a Talking Clock (see the video), but with not good results due the voice module I was using for that. After many searches related to appropriated hardware and also learn how to use …
“This is my first attempt to do a DIY. I did this project during the summer and decided to share it with you guys. I hope you enjoy doing it as much as I did :) For this project I assume …
“This is an arduino based 24 hour digital clock. It is externally powered by battery. There are three buttons (from left to right) for setting hours, minutes and start after time has been set.”