Other

“Any workshop must have a good lab power supply. Somehow it happened that a PC power supply was always enough for me. But when power was needed at 30, 40 and 50 Volts, the situation slightly changed. After a short …

“You may have seen plenty of these simple lights all over the place (instructables/youtube), This is nothing different really but just sharing what I made. This project uses very few materials and is very simple to make. My soldering …

“This small board is based on the CS5171 boost converter from ON Semiconductor. The board is configured to be used with a single 18650 LiPo battery. The circuit converts single-cell 3.7V LiPo battery voltage to 5V with a load …

“I have seen many projects of Infinity Mirrors and Infinity Clocks on Instructables, so I decided to make mine. It may no be very different from the other ones… but I did it myself, so it is ! In case you …

“This little gadget will help you to be up to date about the coronavirus outbreak and the situation in your country. This is an IoT based project which displays the real-time data of cases, deaths and recovered people by the …
Project Wi-Fi-Controlled WS2812B Individually-Addressable LED Yard-Stake Lights for an E1.31 Light-show
“Have you ever driven around your neighborhood during the Christmas season, to observe all the wonderful lighting displays neighbors have put up, and come across those houses whose lights are synchronized to music?(If not, you should really check out …

“ESP tool to measure the performance of an WiFi network. The data is transferred to the Circus-Of-Things platform for viewing and monitoring. The telephone and Internet providers are promising high availability. At least when they compete for you as a …

“This instructable explains how to make a “wink-detector” from a modified AD8232 ECG (electrocardiogram) sensor, an LM324-N quad op-amp, an Arduino Uno R3, and a home-made head-band. The detector has two outputs … one for when you wink your left-eye …

“As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on. It is an instrument used by pilots during flights (sailplane, paraglider, hanglider, balloon, etc.) to help …

“With modern I2C Protocol for the LCD, minimizing the wiring. A Basic Version with the Arduino UNO and a feature rich Version with the MEGA. Since Publication of the Ardutester V1.13 ( with limited number of Display Interfaces, mainly the …