Other
“I always liked the design of the Wii’s Nunchuck controller. But normally you can only use them if they’re physically wired to another device called the Wii Remote. However, with some hardware and software tinkering and time, it …
“This is an Alarm Puzzle Clock which means there is a little memory game you have to solve to stop alarm ringing! As a summary, this clock is for who is being snazzy on mornings. It has 3 LEDs which …
“This is a musical instrument which uses two sonar distance sensors to control the pitch and quality of the notes. It’s not really a Theremin of course but “Theremin” has become the generic term for instruments played by waving …
“NeoPixel’s are awesome we can control hundreds of lights with 3 wires i.e. 5V, Din & GND and in this tutorial, I’ll show how you can make Motion Triggered NeoPixel RGB Shoes! So without any further ado lets …
“A cool Newton’s cradle made from ping pong balls containing WS2812B LEDs. This project emulates a Newton’s cradle using light to demonstrate the conservation of momentum and energy. The original project was created by TecnoProfesor and can be …
“I am using the 1.8 color ST7735 TFT display a lot. The reason for that is that this display is very easy to use, it costs less than $5 and it offers color! At the back, the display has …
“Sync your clock with a NTP time server so they can check the right time if there has been a black out if your not at home :-) Supplies: Plywood (2 layers) Plexiglas Wemos D1 or Wemos D1 mini pro or …
“There’s a lot of arduino/ESP32 clocks going around, but do they use those nice and crisp OLEDs? I’ve been experimenting with arduinos and ESP32’s for a while now, but I never made it to a finished …
“Implementing a pulse oximeter using PYNQ and the Click HR4 sensor. Introduction Even before the Covid-19 pandemic, when I created my list of projects for the year, I included one which would look at oxygen saturation. Given the current pandemic …
“I had a few of these 8x8 LED dot-matrix displays in the drawer and was thinking about what to do with them. Inspired by other instructables, I got the idea to build a count down/up display to count down …